LURPA > Publications > PhD theses and French HdR
Research - Commercialisation
Manufacturing specification synthesis and three dimensional tolerance analysis during product development
On June 9, 2017
10h15
Marie Royer's thesis defense (in French) will take place on Friday, June 9, 2017 at 10:15 am in the Room E-Media on the ENS Paris-Saclay campus in Cachan.
ROYER_photo_rognee.jpg
The thesis committee is composed of:
- M. Pascal MOGNOL, Professeur des Universités, ENS Rennes, Examiner,
- M. Alex BALLU, Maître de Conférences HDR, Université Bordeaux 1, Reviewer,
- M. François VILLENEUVE, Professeur des Universités, Université Grenoble Alpes, Reviewer,
- M. François THIEBAUT, Maître de Conférences HDR, Université Paris-Saclay, Examiner,
- M. Bernard ANSELMETTI, Professeur des Universités, ENS Paris-Saclay, Supervisor,
- M. Mickaël CAUX, Chef de projet, Safran Aircraft Engines, Invitee.
Abstract : Safran Aircraft Engines designs and produces engines for commercial and military aircrafts. In the aeronautics industry, every produced part is really expensive. Consequently, the parts shall not be measured only when they are complete. For that reason, some specifications are verified at several intermediate stages of manufacturing. These specifications are called manufacturing specifications.
Manufacturing transfer is the activity of determining the manufacturing specifications. With this PhD, Safran Aircraft Engines wants a manufacturing transfer method to be proposed. This method shall be automated in a software. The software inputs shall come from the digital environment of the company.
In order to address this issue, PITOL (Production and Intermediate TOLerancing) and DMPITOL (Deviation Model for PITOL) are proposed. A manufacturing transfer method has been developed. It enables one to efficiently realize specification synthesis, tolerance analysis and tolerance optimization. Then the method is automated in a software, so that it is useable in industry.
In order to ease the use of the method by Safran Aircraft Engines, some rules are proposed which make possible the calculation of manufacturing transfer for two specific processes. Moreover solutions are proposed to make the method suitable with the industrialization process.
Key words : 3D Manufacturing Transfer, ISO Tolerancing, Computer Aided Tolerancing
- Type :
- Recent Ph.D and HDR defenses
- Contact :
- Send a message
- Place(s) :
- Cachan Campus
Room E-Media, Building Leonard de Vinci